Top Article

 

Are you trying to find guidance around What Would Cause My Electric Water Heater to Stop Working??

Many modern homes utilize an electric water heater for their heater, due to its ease and also simplicity of use. Nonetheless, much like any other electric appliances, issues might occur with its use, all of a sudden. It can be actually irritating to get up to a chilly shower rather than a warm one or having your bathroom with water that isn't hot enough or perhaps too warm. Whatever the situation may be, water heater problems can be fairly stressful. Fortunately, we've made a listing of possible services to your water heater problems. There are a variety of factors that could create most of these issues, it could be a problem with the power supply, the electrical burner, or the thermostat. Before doing anything, guarantee you shut off the main power supply for safety and security. Whatever the issue is, getting it repaired need to not posture way too much of a problem if you adhere to these steps:

 

Check Your Power Supply:

As standard as this may appear, it is extremely required. Without adequate power, your water heater will certainly not operate. So the first thing to do when your water all of a sudden stops working is to verify that it isn't a power problem. Check if the fuse is burnt out or the breaker stumbled. If the breaker is the issue, merely turn it off and on once more. Change any kind of damaged or worn-out fuse. Test the home appliance with power after these modifications to see if it's now functioning.

 

Examine the Heating Element in the Hot Water Heater:

If it's not a power problem, after that attempt checking out your heating element if it is still working. Test each of your burner to make sure the issue isn't with any of them. If any of them is defective, change that component and then inspect whether the hot water is back on.

 

Examine Your Thermostat:

If your water heater still isn't functioning or the water coming out isn't hot enough, you might require to inspect the temperature settings on your top thermostat. Make certain the circuit breaker is switched off prior to doing anything. Open the accessibility panel as well as press the red switch for temperature reset over the thermostat. This should aid heat up the water. Transform the breaker back on and examine if the issue has been fixed.

 

Call A Specialist:

If after replacing all defective parts as well as resetting your temperature level, the hot water heater still isn't working, you might require to speak to a specialist plumber for a professional opinion. The problem with your heating unit could be that the cold and hot faucets have actually been changed or it may be undersized for the quantity of warm water needed in your home. Whatever the instance might be, a specialist plumber would assist solve the problem.

 

Conclusion

Hot water heater troubles are not constantly major. Most of them are due to minor concerns like a blown fuse or damaged burner. Changing the faulty components ought to work. Nonetheless, if you are still unable to solve the issue, give a call to your closest plumber to come to get it taken care of.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I was made aware of that editorial on Hot Water Heater Repair through an acquaintance on a different web address. Appreciated our blog? Please share it. Help other people locate it. I treasure reading our article about No Hot Water — Water Heater Repair.

Rely on our emergency expertise.